Metal Clutch Line from master cylinder to rear of van on all 2wd manual Vanagon

This is the metal clutch line that runs for most of the length of the van.  In the front there is a short piece of pipe that goes between the clutch master cylinder and a coupler.  This pipe would go from the front floor area to the the rear of the van.  It ends near the nose the transmission and then you transition to either a plastic pipe that goes to the slave cylinder or a rubber hose that may transition to another metal line on the side of the transmission itself.  This pipe comes unbent so you will have to bend it yourself when you install.  Recommend a tubing bender or professional install.