Powerflex Transmission Mount Bushing for all Automatic Vanagon and 85-92 Manual transmission

This is the powerflex bushing that you can use to replace your transmission mount.  You need to keep your old mount, take the old rubber part out with a chisel or hacksaw, and then you can install the new bushing in the old mount.  This bushing will fit in the mounts from all Automatic transmission Vanagon.  It will also work in Manual transmission Vanagon from 85.  This version is about 3 inches in diameter.  If you have an 85 manual Vanagon, I would measure your bushing to be sure which one you need.  There is a smaller version that is for the 80-85 Manual transmission that we also sell.  Just measure your old bushing before ordering to avoid getting the wrong part if you have an 85.